Home Antennas & RF DIY Collinear Antenna (6dBi)
Antennas & RF

DIY Collinear Antenna (6dBi)

$8-20

Specifications

Gain5-6 dBi
Frequency902-928 MHz
PatternOmnidirectional
Range Boost2x vs stock
MaterialsCoax cable, PVC pipe
ConnectorSMA or N-type

Use cases

Mesh nodesBase station (omni coverage)Mobile

Integration code

Example code
# 915MHz 4-Element Collinear Antenna
# Uses coax cable phasing sections

Materials:
- RG58 coax: 2 meters
- PVC pipe 20mm x 50cm (housing)
- SMA connector

# Wavelength at 915MHz = 327.87mm
# Half-wave = 163.9mm
# Velocity factor RG58 = 0.66

Coax Sections (cut EXACTLY):
─────────────────────────────
Section 1 (bottom): 163.9mm (exposed center conductor)
Phase stub: 108.2mm (shorted coax, VF adjusted)
Section 2: 163.9mm (exposed center conductor)  
Phase stub: 108.2mm
Section 3: 163.9mm (exposed center conductor)
Phase stub: 108.2mm
Section 4 (top): 163.9mm (exposed center conductor)

Construction:
1. Strip outer jacket, keep braid folded back
2. Center conductor radiates, braid connects to next section
3. House in PVC pipe, seal ends with silicone

Cost: ~$12 total

Notes and tips

Omni pattern = perfect for mesh nodes that need 360° coverage. Easier to build than Yagi. Slightly less gain but no aiming needed. Mount vertically, as high as possible.